My Cart: 0  items   $0.00
Saturday September 04, 2010
 

BALUNS & Line Isolators

NOTICE: Save 20% off all telephone orders that exceed $100.00 !
BUXCOMM Super SALE ends 6:00 PM Monday September 6th !
Call your friends and tell them about the BUXCOMM SuperSale !

Thanks for shopping www.BUXCOMM.com.  HAM Radio is the public's lifeline
during uncertain times and during disaster;  this hurricane season is no exception.
Having your equipment, antennas, and related communications gear at the ready
is priority one.  In these uncertain times, we want to make sure you get the most
out of your purchase.  Today through Labor Day (September 6th) All telephone
orders over $100.00, receive an additional 20% off. 
Order Toll Free 1 800 726 2919 or 1 866 300 1969  (shipping not included).


PayPal enables you to pay with PayPal, VISA, MasterCard, and Discover.
HamRadioExpress orders are shipped same day received, except sunday and holidays.
At:  www.HamRadioExpress.com/Catalog  OnLine Orders are Secured by

BUXCOMM  is  BALUN  Headquarters.  

We do not use eyebolts as antenna connections.  The Eyebolts are for BALUN and antenna suspension ONLY. 
Stainless Steel or iron eyebolts and some copper antenna wire will oxidize or corrode due to dissimilar metal contact. 

We use solid brass terminal posts to enable good RF, electrical, and mechanical connections
between the BALUN terminal posts, and the antenna wire. 
Ring terminals are silver plated bronze to prevent oxidation caused by dissimilar metal contact. 
We made the antenna screw connection at right angles to make antenna screws easy to tighten
without turning the solid brass terminal.  All terminal posts and connectors are installed with tin plated
lock-washers between each metal or case contact surface.  By using tin-plated lock-washers, we further
provide better metal to metal contact for better RF transfer of energy to the antenna.

Be sure to seal all terminals with Coax Seal Cat #  CS 104.  in the Commonwealth of Virginia


Our MasterMatch BALUN Guarantee:
If; within six months from date of purchase, a BUXCOMM  MasterMatch BALUN  fails while operating within
spec'd operation,  simply return it with the original invoice,  for full, one time replacement.

BALUN and UNUN applications table, CLICK HERE



3M27 Scotch woven Glass Electrical BALUN Toroid and core wrapping Tape

3M27
Scotch woven Glass Electrical BALUN Toroid and core wrapping Tape


$9.99

... more info
B06MM5014 The BUXCOMM MM5014 matches 50 ohms to 12 >16 ohms.

B06MM5014
The BUXCOMM MM5014 matches 50 ohms to 12 >16 ohms.


$27.00
Sale: $24.30
Save: 10% off

... more info
B06MM5022 Mobile BALUN designed to put the RF power into your mobile antenna. Special Introductory price !

B06MM5022
Mobile BALUN designed to put the RF power into your mobile antenna. Special Introductory price !


$27.00
Sale: $24.30
Save: 10% off

... more info
B06SDAB Used with ScrewDriver and end-fed mobile antennas. 3 FT- Coax Jumper is included.

B06SDAB
Used with ScrewDriver and end-fed mobile antennas. 3 FT- Coax Jumper is included.


$27.00
Sale: $24.30
Save: 10% off

... more info
B06VBALUN DeCoupling transformer. Although specd for upper VHF region many are being used into UHF

B06VBALUN
DeCoupling transformer. Although specd for upper VHF region many are being used into UHF


$23.00
Sale: $20.70
Save: 10% off

... more info
B0RXBALUN bridges the impedance gap and enables an unbalance to balanced match between your antenna and receiver.

B0RXBALUN
bridges the impedance gap and enables an unbalance to balanced match between your antenna and receiver.


$17.00

... more info
B15CI11 1:1 Integrated BALUN & Center Insulator. 1.5 kw SSB, UV resistant, Poly-vinyl compound

B15CI11
1:1 Integrated BALUN & Center Insulator. 1.5 kw SSB, UV resistant, Poly-vinyl compound


$29.95
Sale: $26.96
Save: 10% off

... more info
B15CI121 For antennas fed with 600 ohm Window/ladder line, and antennas requiring a 12:1 feed-point BALUN.

B15CI121
For antennas fed with 600 ohm Window/ladder line, and antennas requiring a 12:1 feed-point BALUN.


$29.95
Sale: $26.96
Save: 10% off

... more info
B15CI41 Integrated 4:1 BALUN & Center Insulator. Case is High-Impact, UV resistant, Poly-vinyl compound.

B15CI41
Integrated 4:1 BALUN & Center Insulator. Case is High-Impact, UV resistant, Poly-vinyl compound.


$29.95
Sale: $26.96
Save: 10% off

... more info
B15CI51 Integrated 5:1 BALUN & Center Insulator. Case is High-Impact, light weight, UV resistant, Poly-vinyl compound.

B15CI51
Integrated 5:1 BALUN & Center Insulator. Case is High-Impact, light weight, UV resistant, Poly-vinyl compound.


$29.95
Sale: $26.96
Save: 10% off

... more info
B15CI61 Integrated 6:1 BALUN & Center Insulator. Case is High-Impact, light weight, UV resistant, Poly-vinyl compound.

B15CI61
Integrated 6:1 BALUN & Center Insulator. Case is High-Impact, light weight, UV resistant, Poly-vinyl compound.


$29.95
Sale: $26.96
Save: 10% off

... more info
B15CI91 Integrated 9:1 BALUN & Center Insulator. Case is High-Impact, light weight, UV resistant, Poly-vinyl compound.

B15CI91
Integrated 9:1 BALUN & Center Insulator. Case is High-Impact, light weight, UV resistant, Poly-vinyl compound.


$29.00
Sale: $26.10
Save: 10% off

... more info
B15HFVB Contrary to popular belief that only dipoles need baluns. NOT SO, HF verticals require BALUNS.

B15HFVB
Contrary to popular belief that only dipoles need baluns. NOT SO, HF verticals require BALUNS.


$29.99
Sale: $26.99
Save: 10% off

... more info
B15HFVCMI HF verticals fix'd or mobile, require a balun or a common-mode isolator at the feed point. 1500 watts SSB.

B15HFVCMI
HF verticals fix'd or mobile, require a balun or a common-mode isolator at the feed point. 1500 watts SSB.


$29.97
Sale: $26.97
Save: 10% off

... more info
B1CI161 For antennas fed with 800 ohm Window/ladder line, and antennas requiring a 16 to 1 feed-point BALUN.

B1CI161
For antennas fed with 800 ohm Window/ladder line, and antennas requiring a 16 to 1 feed-point BALUN.


$29.00
Sale: $26.10
Save: 10% off

... more info
B1CI21 Most often used with horizontal Loops and antennas having approximately 100 ohms impedance at the feed point.

B1CI21
Most often used with horizontal Loops and antennas having approximately 100 ohms impedance at the feed point.


$29.00
Sale: $26.10
Save: 10% off

... more info
B1MM101 This BALUN is most often used with terminated folded dipoles having 500 ohm balancing termination resistor.

B1MM101
This BALUN is most often used with terminated folded dipoles having 500 ohm balancing termination resistor.


$28.00
Sale: $25.20
Save: 10% off

... more info
B1MM11 1:1 Dual-core, ferrite core, current type, BALUN 1.6 to 60 Mhz. SSB Rated at 1500 watts.

B1MM11
1:1 Dual-core, ferrite core, current type, BALUN 1.6 to 60 Mhz.
SSB Rated at 1500 watts.


$28.00
Sale: $25.20
Save: 10% off

... more info
B1MM121 12:1 BALUN with multiple cores, This BALUN is most used with T2FD antennas with 600 ohm termination resistor.

B1MM121
12:1 BALUN with multiple cores, This BALUN is most used with T2FD antennas with 600 ohm termination resistor.


$27.00
Sale: $24.30
Save: 10% off

... more info
B1MM161 Master Match 16:1, current type, BALUN for Balanced Terminated Folded Dipole, multi-layered & end-fire antennas

B1MM161
Master Match 16:1, current type, BALUN for Balanced Terminated Folded Dipole, multi-layered & end-fire antennas


$27.00
Sale: $24.30
Save: 10% off

... more info
B1MM21 2:1 Current Balun for use with Quads and Vertical Loop antennas

B1MM21
2:1 Current Balun for use with Quads and Vertical Loop antennas


$29.99
Sale: $26.99
Save: 10% off

... more info
B1MM41 4 to 1 Current BALUN 1.6 to 60 Mhz SSB Rated at 1000 watts.

B1MM41
4 to 1 Current BALUN 1.6 to 60 Mhz SSB Rated at 1000 watts.


$27.00
Sale: $24.30
Save: 10% off

... more info
B1MM51 Special Multiple ferrite cores, current type, BALUN designed for use with Windom & OCF antennas.

B1MM51
Special Multiple ferrite cores, current type, BALUN designed for use with Windom & OCF antennas.


$27.00
Sale: $24.30
Save: 10% off

... more info
B1MM61 6 to 1 Dual, ferrite cores, current type, BALUN 6:1 BALUN 1.5>35 mHz. SSB Rated at 1000 watts.

B1MM61
6 to 1 Dual, ferrite cores, current type, BALUN 6:1 BALUN 1.5>35 mHz. SSB Rated at 1000 watts.


$27.00
Sale: $24.30
Save: 10% off

... more info
B1MM91 Dual-core ferrite core, current type, 9:1, 1.5 to 30 mHz,

B1MM91
Dual-core ferrite core, current type, 9:1, 1.5 to 30 mHz,


$27.00
Sale: $24.30
Save: 10% off

... more info
B1MMLW91 Asymmetrical to asymmetrical (unbalanced to unbalanced, 1 kw ssb) with antenna output studs.

B1MMLW91
Asymmetrical to asymmetrical (unbalanced to unbalanced, 1 kw ssb) with antenna output studs.


$27.00
Sale: $24.30
Save: 10% off

... more info
B1UNUN11 52 ohm SO239 unbalanced input. Unbalanced output to PL259 160 meters to 6 meters. Power Rated 1kW SSB.

B1UNUN11
52 ohm SO239 unbalanced input. Unbalanced output to PL259 160 meters to 6 meters. Power Rated 1kW SSB.


$24.00
Sale: $21.60
Save: 10% off

... more info
B1UNUN41 52 ohm SO239 unbalanced input. Unbalanced output to SO239 160 meters to 6 meters. Power Rated 1 kW SSB.

B1UNUN41
52 ohm SO239 unbalanced input. Unbalanced output to SO239 160 meters to 6 meters. Power Rated 1 kW SSB.


$27.00
Sale: $24.30
Save: 10% off

... more info
B25KW61 2500 watts ssb, 6:1 BALUN 1.5 to 35 mHz

B25KW61
2500 watts ssb, 6:1 BALUN 1.5 to 35 mHz


$59.95

... more info
B25KW91 2500 watts ssb, 9:1 BALUN 1.5 to 35 mHz

B25KW91
2500 watts ssb, 9:1 BALUN 1.5 to 35 mHz


$59.95

... more info
B2KLISO coaxial in-Line isolator has both shield and center conductors isolated w/Multi-Mix ferrites. 2kW SSB

B2KLISO
coaxial in-Line isolator has both shield and center conductors isolated w/Multi-Mix ferrites. 2kW SSB


$29.95
Sale: $26.96
Save: 10% off

... more info
B2KW115TH The MM115TH is poweRated @ 2000 watts, and most often used with HF; 3, 5, and 7 element beams.

B2KW115TH
The MM115TH is poweRated @ 2000 watts, and most often used with HF; 3, 5, and 7 element beams.


$39.95

... more info
B2KW91 50 ohm to 450 ohm, 9:1 current type BALUN is ideal when feeding balanced 450 ohm Ladder-Line.

B2KW91
50 ohm to 450 ohm, 9:1 current type BALUN is ideal when feeding balanced 450 ohm Ladder-Line.


$39.95

... more info
B3KW41 4 to 1 Current BALUN, PoweRated @ 3000 watts.

B3KW41
4 to 1 Current BALUN, PoweRated @ 3000 watts.


$52.00

... more info
BD1K161 Black Diamond,16 to1 multiple, ferrite cores, current type, BALUN, Power Rated, 1000 watts SSB/PEP

BD1K161
Black Diamond,16 to1 multiple, ferrite cores, current type, BALUN, Power Rated, 1000 watts SSB/PEP


$32.00
Sale: $28.80
Save: 10% off

... more info
BD1K21 is our Dual-core, ferrite core, current type, 2:1 BALUN is most often used with horizontal Loops.

BD1K21 is our Dual-core, ferrite core, current type, 2:1 BALUN is most often used with horizontal Loops.


$32.00
Sale: $28.80
Save: 10% off

... more info
BD1K91 1000 watt SSB, 9:1 Dual-Core, current BALUN.

BD1K91
1000 watt SSB, 9:1 Dual-Core, current BALUN.


$32.00
Sale: $28.80
Save: 10% off

... more info
BD2K11 2000 watt, Black Diamond, broad-band, Ferrite core, current BALUN. 1.6 to 60 Mhz

BD2K11
2000 watt, Black Diamond, broad-band, Ferrite core, current BALUN. 1.6 to 60 Mhz


$32.00
Sale: $28.80
Save: 10% off

... more info
BD2K41 Black Diamond, Dual-core, ferrite core, current type, 2000 watt SSB BALUN 1.6 to 60 Mhz.

BD2K41
Black Diamond, Dual-core, ferrite core, current type, 2000 watt SSB BALUN 1.6 to 60 Mhz.


$32.00
Sale: $28.80
Save: 10% off

... more info
BD2K51 Special 5:1 Dual, ferrite core, current type, BALUN designed for use with Windom and OCF antennas

BD2K51
Special 5:1 Dual, ferrite core, current type, BALUN designed for use with Windom and OCF antennas


$32.00
Sale: $28.80
Save: 10% off

... more info
BD2K61 Black DIAMONDtm 2000 watt SSB, Heavy-Duty 6 to1 Dual-core, ferrite core, current type, BALUN

BD2K61
Black DIAMONDtm 2000 watt SSB, Heavy-Duty 6 to1 Dual-core, ferrite core, current type, BALUN


$32.00
Sale: $28.80
Save: 10% off

... more info
CLASP38UV Coax Cable Clasps, use to support or hang RG8U, RG213, & 9913 etc

CLASP38UV
Coax Cable Clasps, use to support or hang RG8U, RG213, & 9913 etc


$0.99

... more info
CS104 For all type of outdoor antenna connections BALUNS Coax connectors coax bulkhead entry panels and mobile installations

CS104
For all type of outdoor antenna connections BALUNS Coax connectors coax bulkhead entry panels and mobile installations


$2.95

... more info
FB12543 Inch and a quarter OD, Type 43 material, the recommended HF BALUN Core Material.

FB12543
Inch and a quarter OD, Type 43 material, the recommended HF BALUN Core Material.


$2.59

... more info
FB30061 No. 61 Composition Core balun bobbin

FB30061
No. 61 Composition Core balun bobbin


$0.99

... more info
FB73SO The perfect fit for RG8X, RG59, RG6, also fits RG58. Use it to install on cables that are already in use.

FB73SO
The perfect fit for RG8X, RG59, RG6, also fits RG58. Use it to install on cables that are already in use.


$1.39

... more info
FBSOCHOKE NOISE SUPPRESSOR Snap-to-gether Ferrite Choke. Reduces or prevents noise ingress into your equipment.

FBSOCHOKE
NOISE SUPPRESSOR Snap-to-gether Ferrite Choke. Reduces or prevents noise ingress into your equipment.


$3.95

... more info
FBSOCHOKEX10 NOISESUPPRESSOR Snaptogether Ferrite Choke... and RFI is history.

FBSOCHOKEX10
NOISESUPPRESSOR Snaptogether Ferrite Choke... and RFI is history.


$34.99

... more info

 
Parse Time: 0.462 - Number of Queries: 1929 - Query Time: 0.248956038895